Lutron Lighting · Lumaris

Lutron Lumaris tape light and downlights

Lumaris is Lutron's tunable-white line: tape light and three- and four-inch downlights that run from warm 1,800K to crisp 4,000K, dim down to 0.1 percent and warm as they dim. It runs on RadioRA 3 or HomeWorks. Pergo Systems plans where it goes in your remodel, coordinates the installation and programs it.

01

Tape light where a remodel needs it

Along a beam, in a cove, on shelves and under cabinets. Lutron sells the tape in 16.4-foot and 98.4-foot rolls that cut down to two-inch pieces, so a run can follow a curve or stop at a window frame.

02

Downlights for the ceiling you have

Remodeler downlights are canless and install in a finished ceiling. Retrofit downlights go into existing cans.

03

White, or white and color

Tunable white tape for accents, or RGB plus tunable white tape where a room also wants color.

04

On the same buttons as the shades

RadioRA 3 brings dimmers, switches and Lutron shades under one control, so one keypad button can lower the shades on a bright window wall and set the light.

Questions

Questions

Where does Lumaris tape light go?

Under cabinets, in coves, along beams and shelves, and along curved edges.

Which Lutron system does Lumaris need?

RadioRA 3 or HomeWorks.

Can Lumaris go into existing recessed cans?

Yes. Lumaris retrofit downlights go into existing cans; remodeler downlights suit a finished ceiling with no cans.

How does Lumaris compare with Rania and Ketra?

Lumaris covers 1,800K to 4,000K and runs on RadioRA 3 as well as HomeWorks. Rania and Ketra reach cooler daylight tones and are listed for HomeWorks.

Free consultation

Plan the glass, the shades and the light together.

A visit at your home, or call (844) 790-3600.

Book a free consultation